Description These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the time-delay or mono-stable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the a-stable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor. The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground. Features 1. Timing From Microseconds to Hours 2. Astable or Monostable Operation 3. Adjustable Duty Cycle 4. TTL-Compatible Output Can Sink or Source 5. Up to 200 mA Applications 1. Fingerprint Biometrics 2. Iris Biometrics 3. RFID Reader Share this post: on Twitter on Facebook on LinkedIn Related
