MAX7219 Dot Matrix Module MCU LED Display Control Module for Arduino

MAX7219 Dot Matrix Module MCU LED Display Control Module for ArduinoMAX7219 Dot Matrix Module is an IC that is used to drive common cathode LED panels, 7-segment displays and level indicators communicating via SPI interface. This board has a 8×8 dot matrix LED display. Multiple modules can be cascaded using header connections.The MAX7219 Dot Matrix Modules are compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs.Technical specifications:8×8 common cathode displayOperating voltage: 5VDimensions: 3.2 cm x 3.2 cm x 1.3 cm4x 3mm mounting holesConnections: VCC, GND, DIN, CS, CLK What is 8×8 dot matrix?The dot matrix that we’re going to use in this guide is a 8×8 matrix which means that it has 8 columns and 8 rows, so it contains a total of 64 LEDs. The MAX7219 chip makes it easier to control the dot matrix, by just using 3 digital pins of the Arduino board.What does the MAX7219 Dot Matrix Module do?The MAX7219 chip communicates via the SPI interface, so it only require 3 data pins to connect to a microcontroller, and what’s more we can daisy-chain several modules together for larger display using the same 3 wires.How does a dot matrix display work?In a LED dot matrix display the LEDs are located at the column and row intersections of the matrix. LEDs in the same row are connected together as are LEDs in the same column.How do you control LED matrix?To control an individual LED, you set its column LOW and its row HIGH. To control multiple LEDs in a row, you set the row HIGH, then take the column high, then set the columns LOW or HIGH as appropriate; a LOW column will turn the corresponding LED ON, and a HIGH column will turn it off.How do I connect a dot matrix to Arduino?To connect the Dot Matrix to Arduino, simply connect the Vcc and GND pins to 5V and GND Arduino, and the DIN, CS, and CLK pins of dot matrix can be connected to any digital pins of Arduino.Related Video : MAX7219 LED Dot Matrix ModuleFor more Displays, click here MAX7219 হল একটি IC যা সাধারণ ক্যাথোড LED প্যানেল, 7-সেগমেন্ট ডিসপ্লে এবং SPI ইন্টারফেসের মাধ্যমে যোগাযোগের স্তর নির্দেশক চালাতে ব্যবহৃত হয়। এই বোর্ডে একটি 8×8 ডট ম্যাট্রিক্স LED ডিসপ্লে রয়েছে। হেডার সংযোগ ব্যবহার করে একাধিক মডিউল ক্যাসকেড করা যেতে পারে। MAX7219 হল কমপ্যাক্ট, সিরিয়াল ইনপুট/আউটপুট কমন-ক্যাথোড ডিসপ্লে ড্রাইভার যা ইন্টারফেস মাইক্রোপ্রসেসর (µPs) থেকে 7-সেগমেন্টের সাংখ্যিক LED ডিসপ্লে 8 ডিজিট পর্যন্ত, বার-গ্রাফ ডিসপ্লে, বা 64টি পৃথক এলইডি। Keep an eye on our website to avail the –MAX7219 Dot Matrix Module MCU LED Display Control Module for Arduino best price in BD (Bangladesh)