ESP32 CAM Development Board OV2640 Module with ESP32-CAM-MB

DescriptionThe ESP32-CAM is a small-size, low-power consumption camera module based on ESP32. It comes with an OV2640 camera and provides an onboard TF card slot.The ESP32-CAM can be widely used in intelligent IoT applications such as wireless video monitoring, WiFi image upload, QR identification, and so on.The ESP32-CAM suit for IOT applications such as:Smart home devices’ image uploadWireless monitoringIntelligent agricultureQR wireless identificationfacial recognitionNOTESThe connection to 5V is required for the programming.Please make sure that the input power of the module is at least 5V 2A, otherwise the picture may have water lines. SPECIFICATIONSWIFI module: ESP-32SProcessor: ESP32-D0WDBuilt-in Flash: 32MbitRAM: Internal 512KB External 4M PSRAMAntenna: Onboard PCB antennaWiFi protocol: IEEE 802.11 b/g/n/e/iBluetooth: Bluetooth 4.2 BR/EDR and BLEWIFI mode: Station / SoftAP / SoftAP StationSecurity: WPA/WPA2/WPA2-Enterprise/WPSOutput image format: JPEG (OV2640 support only), BMP, GRAYSCALESupported TF card: up to 4GPeripheral interface: UART/SPI/I2C/PWMIO port: 9UART baudrate rate: default 115200bpsPower supply: 5VOperating temperature: -20 ℃ ~ 85 ℃Storage environment: -40 ℃ ~ 90 ℃, <90%RHTransmitting power:802.11b: 17 ±2dBm(@11Mbps)802.11g: 14 ±2dBm(@54Mbps)802.11n: 13 ±2dBm(@HT20,MCS7)Receiving sensitivity:CCK,1Mbps: -90 dBmCCK,11Mbps: -85 dBm6Mbps(1/2 BPSK): -88 dBm54Mbps(3/4 64-QAM): -70 dBmHT20,MCS7(65Mbps, 72.2Mbps): -67 dBmPower consumption:Flash off: 180mA@5VFlash on and brightness max: 310mA@5VDeep-Sleep: as low as 6mA@5VModern-Sleep: as low as 20mA@5VLight-Sleep: as low as 6.7mA@5VDimensions: 40.5mm x 27mm x 4.5mmGross Weight: 0.008kgFEATURESOnboard ESP32-S module, supports WiFi BluetoothOV2640 camera with flashOnboard TF card slot, supports up to 4G TF card for data storageSupports WiFi video monitoring and WiFi image uploadSupports multi sleep modes, deep sleep current as low as 6mAControl interface is accessible via pinheader, easy to be integrated and embedded into user productsAntenna selectionChange the position of the following resistor to select the antenna to be used: The resistor is at position ① by default and uses the onboard antenna. The gain is 2db. If you need to use the external antenna, please modify the resistor to position ② by yourself.ESP32-CAM-MB AdapterDOCUMENTTutorial WikiSHIPPING LIST1 x ESP32 CAM Development Board OV2640 Module with ESP32-CAM-MB