Description Generate Features about CC1101: Work on 433 MHz free ISM RF band, no need license. Built-in hardware CRC error detection, and address control The maximum rate of 500kbps (1.2K Min.), support for 2-FSK, GFSK, FSK and MSK modulation, support the transmission channel before the auto-clean-up visits (CCA), the Carrier Sense System, very suitable for using at industrial environment. Fast frequency changes brought about by a suitable synthesizer frequency hopping system Most 256 program channels (20M band). Large data buffer area. Separate 64-byte RX and TX data FIFO Address can be set up by software, only received local address only when the output data (provided interrupt instruction), can be directly connected using a variety of MCU, very convenient High sensitivity: 1.2Kbps under-110dBm, 1% packet error rate Lower current consumption: 20mA averagely in RX mode and 30mA averagely in TX mode, at 10dBm Models Available: CC1101-LSS R2: Low Power, SPI interface, Spring Coil CC1101-LUS: Low Power, UART TLL interface, Spring Coil CC1101-LUR: Low Power, UART TTL interface, rod antenna (Similar to LUS, except the antenna) CC1101-MSR: Medium Power, SPI interface, rod antenna All the modules can communicate with our other CC1100 modules. Specification of CC1101-LSS R2: Setup software can modify Rate, Power, Frequency Wireless wake-up functionality to support low-power electromagnetic activation, wireless wake-up low-power sleep state of the equipment Please review the R2 version’s image here. Specification of CC1101-LUS/LUR: Onboard data-handler MCU Use professional single MCU design, lower user cost and use UART TTL interface. Smart data control, less programming code needs. Support transparent data communication and DL/645 rule. This module is combine with high performance sliver-finished spring coil antenna, cost-efficiency. See CC1101 technical information here. About the antenna type, please see on this page.
